Accessories for Reserve Parachutes
The right reserve parachute accessories complement your rescue system and support its safe and suitable integration into your paragliding equipment. Depending on the harness and reserve parachute, different components may be required for connection, attachment or storage.
This category includes front containers, connecting lines, connectors and other accessories for reserve parachutes. This allows you to configure your rescue system to suit your harness and individual requirements.
Woody Valley Neoprene Tubolar Cover
Neoprene protective cover for oval maillon rapide up to 7mm or other parts that need to be covered or protected. Length about 12 cm.
Peguet Maillon Rapide Oval Mild Steel 7 mm
Material: Steel 7mm, Inner height: 52 mm, Opening: 8,5 mm, Breaking load: 2750 kg, Payload: 550 kg, Weight: 51g
Tip
Niviuk IKS 3000 Dyneema (Interlock System)
The IKS3000 is designed to connect the risers and/or the parachute with the harness with a breaking load of 2960kg.
Niviuk Reserve V-Bridle Dyneema (Solo)
Lightweight paragliding reserve bridle made of Dyneema, with stitched loops at each end, to connect a tandem paragliding reserve parachute. Length: 130 cm
Niviuk Easy IKS 2500 (Pair)
The Easy IKS 2500 is a lightweight connection system designed to connect risers with the harness, and it can also connect the parachute to the harness using the Y-Bridle.
SOL Neoprene Protector for Risers
Neoprene protective cover for foot stirrup and also to join the bridle of the harness with bridle Reserve. Length approx 6,5 cm.
Icaro Dyneema V-Bridle Solo
Lightweight solo paragliding reserve bridles made of Dyneema, to connect a solo paragliding reserve parachute to a solo paragliding harness. Length: 140 cm.
Supair Dyneema Reserve Bridle - Tandem
Lightweight tandem paragliding reserve bridle made of Dyneema, with stitched loops at each end, to connect a tandem paragliding reserve parachute. Length: 215 cm
Discount
Woody Valley Front rescue container with instrument panel
Cockpit instrument panel with container for emergency parachute. Adjustable volume container to adapt to most emergency parachutes on the market.
Woody Valley Paragliding tie rope dynema with velcro (V line)
"V" harness bridle with Dyneema belt covered with nylon for further protection from abrasions. Provided with Velcro strips for container AP031. Length 120 cm with 2400 daN load capacity with approval.
Discount
SOL Front Container Compact
Front container designed for lightweight harnesses used in high mountain areas that do not have an integrated rescue container.
Charly 3,3 t Extension Loops
The high-strength and low-stretch Dyneema loops are resistant to moisture, UV and chemicals and weigh only 14 g each.
Woody Valley Paragliding tie rope dynema (V line)
"V" harness bridle with Dyneema belt, compatible with: all harnesses. Length 120 cm with 2400 daN load capacity with approval.
Kontest O-Ring Set 30 x 3 mm (10 pcs.)
These o-rings are not cheap and continuous tearing, but rubber rings which are also used by the manufacturers. UV resistant.
Independence Dyneema Reserve Bridle - Tandem
approx. 2,1m V-bridle for rescue parachutes – especially for paramotoring purposes and for tandem-harnesses.
SOL Bridle Dyneema 140cm
It can be used for all harnesses that uses 1.4 meters bridle, except for tandem and paratrike harnesses.
Charly Hike & Fly V-Line
+ 1 variations
If you want to reduce the weight of your paragliding equipment, you should definitely choose the extem lightweight Charly Hike & Fly V-Line.
Kortel Kontainer V4 Light
+ 1 variations
The Kontainer V4 light allows you to install an emergency parachute in the ventral position on all types of harness.
Discount
High Adventure Frontcontainer GStar
Size:
M
Gstar steht für die zuverlässige Freigabe des Rettungsgerätes, auch bei hoher G-Kraft. Der clevere Auslösemechanismus ermöglicht die beidseitige Freigabe des Retters, wahlweise mit der linken oder rechten Hand.
Woody Valley Front light rescue container with instrument panel
Light cockpit instrument panel with container for emergency parachute. Rigid support covered with Velcro and provided with loops for safety of your instruments during flight.
Charly Riser Cover for tandem and paramotor
+ 1 variations
Using Velcro straps, the Charly Riser Cover can be guided from the attachment point of the rescue to the protected area inside the harness.
SOL Neoprene Protector with Velcro for Risers / Foot Stirrup
Neoprene protective cover for foot stirrup and also to join the bridle of the harness with bridle Reserve. Length approx 8 cm.
Discount
Icaro Front Container Apus
The optimally coordinated front container for the Icaro APUS harness.
Sold out
BGD O-Ring Set 30 x 2 mm (5 pcs.)
These O-rings are high-quality, UV-resistant rubber rings that are used for mounting on the reserve line locks.